Starting from the left of the IDE connection you’ll see the jumper switch for master, slave and cable select. The drive uses the well known RPC II region control, allowing a user to change the drive’s region at most 5 times. More notably, the gray stripe found on LG’s previous “Super-Multi” drives has been removed. The drive that LG sent us for this review was manufactured in August of and had firmware version DL As discussed earlier in this page, all writing tests were made with the DL11 firmware revision installed. A patched RPC-1 firmware can be downloaded here.
|Date Added:||10 November 2006|
|File Size:||26.4 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Seagate Enterprise Capacity 3. By default the drive’s lg gsa-4167b position is set to master. Auvio Bluetooth Portable Speaker Review. This manual is related to the following products: Also, the gray bottom has been replaced by a white one.
LG GSAB Support: Manuals, Warranty & More | LG U.S.A
Therefore, all reading and error correction tests were made gsx-4167b the old firmware the Gsa-4617b and writing tests were made with the latest firmware lg gsa-4167b DL11since upon flashing the drive, all writing tests were repeated. The drive’s region can be changed five times and after that it cannot be changed anymore. Most of the specs below have been lh from LG’s website and the guide that came with the drive. More notably, the gray stripe found on LG’s previous lg gsa-4167b drives has been removed.
The front panel of the B drive at first glance is more or less a typical LG one. As discussed earlier in this page, all writing tests were made with the DL11 firmware lg gsa-4167b installed. A patched RPC-1 firmware can be downloaded here.
Rear panel – LG GSA-4167B User Manual
Always lg gsa-4167b the power OFF when connecting or disconnecting the cable. The label of the drive, indicating among others the model name, SN, ROM version default firmwareand Manufactured date.
Generally you need this to play a regular audio CD. Do not connect or disconnect the cable lg gsa-4167b the power is on, as this could cause a short circuit and damage the system.
This buffer lg gsa-4167b also backed up by some form of buffer underrun protection.
For this review the drive’s firmware has been updated to version DL Thursday, May 17, Usually lg gsa-4167b connector can only be attached one-way. The connector on the llg left is the digital audio output.
The drive uses the well known RPC II region control, allowing a user to change the drive’s region at most 5 times. Lg gsa-4167b the master-slave configuration takes effect after power-on reset.
Now LG releases lg gsa-4167b latest drive, the B model, an upgrade of the B. Note that by opening the drive, one would render the guarantee void, so we advise against it.
Now, let us take a closer look on lg gsa-4167b drives mechanism board and chip. Connecting the wrong way may damage the system and is not guaranteed.
Be lg gsa-4167b to connect with the proper polarity. This program queries the drive to see what its reading and writing capabilities are. This jumper determines gda-4167b the drive is configured as a master or slave.
LG GSAB Internal Super Multi DVD Writer (Page 1/9) :: Articles :: ®
In this case, the technology used is “Super Link. In this lg gsa-4167b, its August Use it at your own risk. The GSAB still has its share of logos though. Digital Audio Output Connector This connector is not supported.